Cisco 2600 Series Instrukcja instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt sieciowy Cisco 2600 Series. Cisco 2600 Series 22 stron. Configuring adsl wic to support pppoe clients
Również dla Cisco 2600 Series: Instrukcja instalacji (12 strony), Informacje o wersji (32 strony), Konfiguracja (15 strony), Nota aplikacyjna (41 strony), Arkusz danych (6 strony), Dodatek (15 strony), Przegląd (13 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (5 strony)

Chapter 3

Installing the Router

Use 19-inch brackets (shown in

Note

the most stable installation for the chassis.

To wall-mount the chassis:

Attach the brackets as shown in

Step 1

Figure 3-17 Attaching the Wall-Mount Brackets

Attach the chassis assembly to the wall as shown in

Step 2

provide. We recommend the following:

For the best support of the chassis and cables, attach the brackets so that the screws align with a

•

vertical wall stud. (See

the wall when cables are attached.

For the best ventilation of the chassis, mount the chassis with the power supply and fan at the top.

•

Make sure there is clearance between the router and the wall.

OL-2171-02

Figure

3-4) to wall-mount the chassis. The small brackets provide

Figure

3-17.

Figure

3-18.) This position will prevent the chassis from pulling away from

Cisco 2600 Series Routers Hardware Installation Guide

Setting Up the Chassis

3-18, using screws and anchors that you

3-11