Cisco 6160 Notas de instalación y sustitución - Página 3

Navegue en línea o descargue pdf Notas de instalación y sustitución para Hardware de red Cisco 6160. Cisco 6160 18 páginas. Without a pots splitter configuration
También para Cisco 6160: Manual de consulta rápida (38 páginas), Manual de instalación del hardware (21 páginas), Manual de procedimientos de instalación (32 páginas)

Imprimir página
Cisco 6160 Notas de instalación y sustitución
Faceplate Features
Figure 2
Figure 2
1
1
2
To power down a Cisco 6160 that has two PEMs installed, you must flip the circuit breakers on both
Note
PEMs to the Off (0) position.
Table 1
Table 1
LED
INPUT OK
OUT FAIL
OL-2181-01
shows a close-up of the PEM faceplate.
PEM Faceplate
!
CAUTION
!
ATTENTION
!
PRECAUCION
!
ACHTUNG
!
2
INPOUT OK
OUTPUT FAIL
3
Two-position circuit breaker. The positions
are Off (0) and On (1).
INPUT OK LED.
describes the LEDs on the PEM.
PEM LEDs
State
Function
Green
–48VDC power is available to the chassis.
Off
The PEM has a power failure.
Red
One or both of the following conditions exists:
OUT FAIL LED.
3
The PEM is not distributing power to the chassis.
•
The PEM is not distributing power to its cooling fans.
•
Introduction
Faceplate Features
3