Argo Kobra +2SS7 Manual de instrucciones - Página 13
Navegue en línea o descargue pdf Manual de instrucciones para Trituradora de papel Argo Kobra +2SS7. Argo Kobra +2SS7 17 páginas.
Imprimir página
WARNING: if the motor saving function comes on, the machine may not be used even if
the light (B) is on.
- ENERGY SMART SYSTEM which automatically reduces the power consumption of the
machine to practically zero when it is on stand-by about 12 seconds after the end of the
last automatic shred cycle.
tROUBleshOOtInG
if this fails to resolve the problem, contact your nearest kobra sales outlet.
Do not open the cutting head of the shredder to try to repair it.
You could expose yourself to serious electric shock and invalidate your warranty.
PROBLEM
The shredder does
• The ENERGY SMART
not start
light (B) does not come
on;
• When paper is
inserted into the front
slit the machine does
not start;
• When the Transparent
swinging cover is
opened the machine
does not start.
The shredder never
• Light (B) switched
stops.
on, shredder blades in
operation.
considerable
• Capacity reduced
reduction in shred
compared with
capacity (only on
capacity seen with
kobra +3 models).
oiled blades.
© arGO s.a.
EN
SYMPTOMS
• Button Position (A)
• Paper bin (2)
incorrectly positioned
on the sTaND (4).
• Cable not connected
properly.
• No power supply.
• Transparent Swinging
cover (D) not closed.
• Hand guard Flap (E)
not closed correctly.
• Reflective glass of
Hand guard Flap is
dirty.
• Material and/or dirt
on electronic eyes (c).
• Cutting blades not
oiled.
13
CAUSE
• Move to FWD
position.
• Push the Paper Bin
down correctly onto
the stand.
• Check that the plug is
fully plugged into the
socket.
• Check that the power
supply to the socket
is on.
• Close the Transparent
swinging cover.
• Close the Hand guard
Flap properly.
• Remove the dirt on
the reflective Glass.
• Remove dirt from
electronic eyes.
• Oil the cutting blades.
ACTION
www.argo.pl