Argo Kobra +2SS7 사용 설명서 - 페이지 13

{카테고리_이름} Argo Kobra +2SS7에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo Kobra +2SS7 17 페이지.

페이지 인쇄

WARNING: if the motor saving function comes on, the machine may not be used even if

the light (B) is on.

- ENERGY SMART SYSTEM which automatically reduces the power consumption of the

machine to practically zero when it is on stand-by about 12 seconds after the end of the

last automatic shred cycle.

tROUBleshOOtInG

if this fails to resolve the problem, contact your nearest kobra sales outlet.

Do not open the cutting head of the shredder to try to repair it.

You could expose yourself to serious electric shock and invalidate your warranty.

PROBLEM

The shredder does

• The ENERGY SMART

not start

light (B) does not come

on;

• When paper is

inserted into the front

slit the machine does

not start;

• When the Transparent

swinging cover is

opened the machine

does not start.

The shredder never

• Light (B) switched

stops.

on, shredder blades in

operation.

considerable

• Capacity reduced

reduction in shred

compared with

capacity (only on

capacity seen with

kobra +3 models).

oiled blades.

SYMPTOMS

• Button Position (A)

• Paper bin (2)

incorrectly positioned

on the sTaND (4).

• Cable not connected

properly.

• No power supply.

• Transparent Swinging

cover (D) not closed.

• Hand guard Flap (E)

not closed correctly.

• Reflective glass of

Hand guard Flap is

dirty.

• Material and/or dirt

on electronic eyes (c).

• Cutting blades not

oiled.

CAUSE

• Move to FWD

position.

• Push the Paper Bin

down correctly onto

the stand.

• Check that the plug is

fully plugged into the

socket.

• Check that the power

supply to the socket

is on.

• Close the Transparent

swinging cover.

• Close the Hand guard

Flap properly.

• Remove the dirt on

the reflective Glass.

• Remove dirt from

electronic eyes.

• Oil the cutting blades.

ACTION