Sony Power HADFX HDC-P1 Manual de instrucciones - Página 15
Navegue en línea o descargue pdf Manual de instrucciones para Cámara digital Sony Power HADFX HDC-P1. Sony Power HADFX HDC-P1 36 páginas. Hd multi purpose camera
También para Sony Power HADFX HDC-P1: Folleto (36 páginas), Folleto (4 páginas), Folleto (4 páginas), Folleto (2 páginas)
Imprimir página
3
Rotate the menu control knob to align the pointer to
"TOP" and push on the knob.
The TOP MENU screen is displayed.
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
4
Rotate the menu control knob to align the pointer to
OPERATION and push on the knob.
The CONTENTS page of the OPERATION menu is
displayed.
CONTENTS
01.<VF DISPLAY>
02.<VF MARKER>
03.<VF DETAIL>
04.<FOCUS ASSIST>
05.<ZEBRA>
06.<CURSOR>
07.<OPERATOR FILE>
08.<LENS FILE>
5
Rotate the menu control knob to align the pointer to
<VF DETAIL> and push on the knob
The <VF DETAIL> page is displayed.
<VF DETAIL>
VF DETAIL :
CRISP
:
FREQUENCY:
FLICKER
:
AREA
:
ZOOM LINK: 100%
COLOR DETAIL :
PEAK COLOR
CHROMA LEVEL: 100%
6
Rotate the menu control knob to align the pointer to
the item to be set and push on the knob.
To use the VF detail signal
Set VF DETAIL to ON to activate the VF detail function to
add the detail signal to sharp edges in the image. You can
adjust the signal level (strength) in the range of 0 to 100%
(default: 25%).
You can adjust the characteristics of the detail signal with
the menu items below:
CRISP: Adjust to eliminate fine portions of the detail
signal.
FREQUENCY: Change the detection band of sharp
edges.
FLICKER: Set the function for flickering the detail signal
to ON/OFF. (Setting the function to ON makes it easier
to check the detail signal on a CRT screen.)
AREA: To limit the area where to display the detail signal.
ZOOM LINK: Set the VF detail level at the full WIDE
position. (The VF detail level changes according to the
zoom position. The default setting is 100% with no
change at the full WIDE position. It becomes half at
50%.)
To use the color detail
Set COLOR DETAIL to ON to convert the VF detail signal
to a specified color. The display color can be selected in
the column on the right of ON.
00
TOP
03 TOP
ON
25%
0
9M
OFF
70%
ON
BLUE
:
ON
You can adjust the coloring with the menu items below:
PEAK COLOR: Turn the function ON/OFF to change the
color where the detail signal is strongest.
CHROMA LEVEL: To reduce the chroma components of
the video signal.
7
Rotate the menu control knob to display the desired
setting and push on the knob.
8
To finish the adjustments, set the DISPLAY/MENU
switch to OFF to exit Menu mode.
Displaying the focus assist indicators
The focus assist indicator function extracts the irregularities of
a subject and converts the integrated values to a level
indicator, which shows the focus condition.
Level indicator (Its position and operations can be adjusted.)
Area marker to display the detection area of the
focus (Its size and position can be adjusted.)
The focus setting where the indicator shows the maximum
level is the best focus setting. (The range of the indicator
substantially changes depending on the picture elements or
shooting environment. Adjust it with GAIN and OFFSET as
necessary.)
1
Display the CONTENTS page of the OPERATION
menu (referring to step 1 to 4 in "Adding a VF detail
signal").
2
Rotate the menu control knob to align the pointer to
<FOCUS ASSIST> and push on the menu control
knob.
The <FOCUS ASSIST> page is displayed.
<FOCUS ASSIST>
INDICATOR
: OFF
MODE
: BOX
LEVEL
: 3
GAIN
: 50
OFFSET
: 50
AREA MARKER:
SIZE
: MIDDLE
POSITION
: CENTER
POSITION H: 50
POSITION V: 50
04 TOP
BOTTOM
QUICK
ON
Preparatory Settings
15