Sony CMT-CP100 Manual de servicio - Página 4
Navegue en línea o descargue pdf Manual de servicio para Sistema estéreo Sony CMT-CP100. Sony CMT-CP100 50 páginas. Micro hifi component system
También para Sony CMT-CP100: Manual de instrucciones (24 páginas), Manual de instrucciones (26 páginas), Manual de servicio (2 páginas)
Imprimir página
HCD-CP100/CP100K
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
• MODEL IDENTIFICATION
– Rear Panel –
Power Voltage Indication
Model
US, CND, MX models
AEP, UK models
E, EA, AR, SP, AUS models
KR model
• Abbreviation
AR
: Argentina model.
AUS : Australian model.
CND : Canadian model.
EA
: Saudi Arabia model.
KR
: Korean model.
MX
: Mexican model.
SP
: Singapore model.
TH
: Thailand model.
4
SECTION 1
SERVICING NOTES
VOLTAGE SELECTOR
Switch
Power Voltage
Incdication
AC: 120 V 60 Hz 75 W
AC: 230 V -50/60 Hz 75 W
AC: 110 – 120/
220 – 240 V / 50/60 Hz 75 W
220 V/60 MHz 75 W
SERVICE POSTION
In checking the CD block, prepare jig (extension cable J-2501-
011-B).
MAIN board
Connect jig (extension cable J-2501-011-B)
to the MAIN board (CN101) and CD board (CN101).
CD board