Sony CMT-CP100 서비스 매뉴얼 - 페이지 4
{카테고리_이름} Sony CMT-CP100에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony CMT-CP100 50 페이지. Micro hifi component system
Sony CMT-CP100에 대해서도 마찬가지입니다: 사용 설명서 (24 페이지), 사용 설명서 (26 페이지), 서비스 매뉴얼 (2 페이지)
페이지 인쇄
HCD-CP100/CP100K
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
• MODEL IDENTIFICATION
– Rear Panel –
Power Voltage Indication
Model
US, CND, MX models
AEP, UK models
E, EA, AR, SP, AUS models
KR model
• Abbreviation
AR
: Argentina model.
AUS : Australian model.
CND : Canadian model.
EA
: Saudi Arabia model.
KR
: Korean model.
MX
: Mexican model.
SP
: Singapore model.
TH
: Thailand model.
4
SECTION 1
SERVICING NOTES
VOLTAGE SELECTOR
Switch
Power Voltage
Incdication
AC: 120 V 60 Hz 75 W
AC: 230 V -50/60 Hz 75 W
AC: 110 – 120/
220 – 240 V / 50/60 Hz 75 W
220 V/60 MHz 75 W
SERVICE POSTION
In checking the CD block, prepare jig (extension cable J-2501-
011-B).
MAIN board
Connect jig (extension cable J-2501-011-B)
to the MAIN board (CN101) and CD board (CN101).
CD board