Cisco ASA 5506-X Montar el chasis - Página 5

Navegue en línea o descargue pdf Montar el chasis para Hardware de red Cisco ASA 5506-X. Cisco ASA 5506-X 10 páginas. Threat defense reimage guide
También para Cisco ASA 5506-X: Manual de inicio rápido (10 páginas), Manual de inicio rápido (14 páginas), Manual de instalación sencilla (11 páginas), Manual de software (37 páginas), Montar y conectar (12 páginas), Manual de instalación (46 páginas), Manual de instalación del hardware (26 páginas)

Mount the Chassis

Figure 3: Install the Rack Shelf on the Chassis

Three short black screws M3 x 6 mm (part number

48-0384-01)

Step 4

Adjust the position of the chassis and the rack shelf until the three mounting holes in the dimples in the bottom of the

shelf are aligned with the mounting holes in the bottom of the chassis.

Step 5

Tighten the screws to lock the chassis into place on the rack shelf.

Caution

Make sure you are using the short black screws (M3 x 6 mm), otherwise you will damage the chassis.

Step 6

Carefully turn the rack shelf right-side up.

Step 7

Install the power supply on the rack shelf behind the chassis.

Rack-Mount the Chassis

Mount the Chassis