Sony MDR-RF845RK Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony MDR-RF845RK. Sony MDR-RF845RK 12 páginas. Wireless stereo headphone sysytem
También para Sony MDR-RF845RK: Manual de servicio (15 páginas), Manual de servicio (2 páginas)
Imprimir página
Continued
5
-A Turn up the volume to a moderate
level with the VOL control.
Press the TUNING button briefly for
automatic tuning of the headphones.
If you do not receive a clear audio
signal, press it again.
A MDR-RF845RK
5
-B Turn up the volume to a moderate
level with the VOL control, then
tune the headphones in to the
frequency of the transmitter with the
TUNING control until you can hear
the audio signal loud and clear.
B MDR-RF815RK
Try the above steps 3 and 5 until the
receiving performance becomes better.
8
TUNING
button
VOL control
TUNING
control
VOL control
Sending RF signals from the Transmitter
The transmitter starts sending the RF signals
automatically, when it detects audio signals from
the equipment connected.
If it does not detect an audio signal for more than
approximately four minutes, the transmitter will
stop sending RF signals, and the power indicator
turns off.
When the transmitter receives an audio signal
again, it starts sending the RF signals, and the
power indicator will light in red again.
If the audio signal is very weak, the transmitter
does not send RF signals. If the transmitter is
connected to a headphone jack, make sure the
volume of the equipment connected is set to 5 – 6
or higher.
You may not hear the beginning of the sound
from the headphones until the transmitter starts
sending the RF signals after detecting an audio
signal.
Auto power on/off function
When you remove the headphones from your
head, the power turns off automatically. Do not
allow the self adjusting band to be pulled up,
otherwise the headphones will be switched on.
The power turns on.
Note
If a hissing noise is heard move closer to the transmitter.