Sony MHC-LX10000 - High Power Mini Hi-fi System Manual de instrucciones - Página 31
Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony MHC-LX10000 - High Power Mini Hi-fi System. Sony MHC-LX10000 - High Power Mini Hi-fi System 39 páginas. Limited warranty (us only)
También para Sony MHC-LX10000 - High Power Mini Hi-fi System: Manual de instrucciones (40 páginas), Hoja de especificaciones (2 páginas), Especificaciones (2 páginas), Garantía limitada (1 páginas)
MP3 audio
track cannot
be played
back.
• Recording
was not pertbmled
according
to the
ISO 9660 level 1, level 2 or Joliet in the expansion
fommt
• The MP3 audio track does not have the extension
"MP3".
• The data is not stored in MP3 fomlat
even though
it has extension
".MP3".
• The MP3 audio tlacks in fbrmat other than MPEG
1, 2 and 2.5 Audio Layer 3 cannot be played back.
• The system can play back to a depth of 8 tblders
only
• MP3 audio tracks in MP3 PRO tbnnat cannot be
played back on this system.
MP3 audio tracks
take longer time to play back
than others.
• Afte! tile system reads all tracks on tile discs
playback
may take more time than usual it'.
the number of albums or tracks on the disc is
very large
the albtml and track organization
smlcmre
is
very complex.
The album
title, track title, ID3 tag and the
CD-TEXT
characters
do not appear
properly.
• Use a disc that confomls
with ISO 9660 level 1,
level 2 or Joliet in the expansion
fomlat.
• The ID3 tag is not version
1 or version
2.
• The character
code that can be displayed
by this
system
are as tbllow:
Upper cases (A to Z)
Lower cases (a to z)
Numbers
(0 to 9)
Symbols
(< > * +,
/ [ ] ")
Other characters
may not be displayed
conectly
Tuner
There
is severe
hum or noise.
(='TUNED"
or
"STEREO"
flashes
in the display)
• Set the propel
band and fiequency
(page 13).
• Connect
the antenna
properly
(page 7).
• Find a place and an orientation
that provide
good
reception,
then set up the antenna
again. If you
cannot obtain good reception,
we recommend
you
connect
all
external
antenna
• The supplied
FM lead antemla receives
signals
along its entire length, so make sure you extend it
fiflly.
• Locate the antennas
as tar away flom the speake_
cords as possible.
• T_y turning off smrounding
electrical
equipment
• Set CD power manage
flmction to "CD POWER
OFF" (page 14)
A stereo
FM program
cannot
be received
in
stereo.
• Pless FM MODE
on the remote
lepeatedly
until
"MONO"
disappears
in the display.
Tape deck
The tape does not record
or playback,
or there
is a decrease
in sound level.
• Tile tape heads are dir b, (see "Cleaning
tile tape
heads" on page 34).
• The record/playback
heads are magnetized
(see
"Demagnetizing
the tape heads"
on page 34).
The tape does not erase
completely.
• Tile record/playback
heads me magnetized
(see
"Demagnetizing
the tape heads"
on page 34).
There
is excessive
wow or flutter,
or the sound
drops
out.
• Tile capstans
or pinch !oilers are dirty (see
"Cleaning
tile tape heads"
on page 34).
Noise
increases
or the high frequencies
are
erased.
• Tile record/playback
heads me magnetized.
(see
"Demagnetizing
the tape heads"
on page 34).
The tape does not record.
• No tape is loaded.
Load a tape
• The tab has been removed
fiom the tape. Cover
the broken
tab with adhesive
tape (page 34).
• The tape has reeled
to the end
c-
O
o
5'
(,Q
continued
31us