Sony MHC-LX10000 - High Power Mini Hi-fi System Manual de instrucciones - Página 29

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony MHC-LX10000 - High Power Mini Hi-fi System. Sony MHC-LX10000 - High Power Mini Hi-fi System 39 páginas. Limited warranty (us only)
También para Sony MHC-LX10000 - High Power Mini Hi-fi System: Manual de instrucciones (40 páginas), Hoja de especificaciones (2 páginas), Especificaciones (2 páginas), Garantía limitada (1 páginas)

Sony MHC-LX10000 - High Power Mini Hi-fi System Manual de instrucciones
Should you enconnter
a problem with your
system, do the %llowing:
1
Make sure the power cord and speaker
cords are connected correctly and firmly.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
If the problem
persists after doing all of the
above, consult your nearest Sony dealer.
Note that if service personnel
changes
some
parts during repair, these parts may be retained.
When
the
I/_
indicator
flashes
Immediately
unplng the power cord and
check the lbllowing
items.
• If your unit have voltage
selector, is the
voltage
selector set to the correct voltage?
Check the voltage lbr your region, then
make snre the voltage selector is set
correctly.
• Are you using the supplied speakers?
• Is anything blocking
the ventilation
holes
on the rear of the unit?
After checking
the above items and fixing
any problem,
plug in the power cord again
and turn on the system. If the I/(_) indicator
still flashing, or if the cause of the problem
cannot be found even after checking
all the
above items, consult your nearest Son>:
dealer.
General
The display
starts
flashing
as soon
as you
plug in the power
cord even though
you have
not turned
on the system.
• The demonstration
1node stinted. P2ess I/(_
(see
step 7 of"Hooking
up the system"
on page 6).
The clock/timer
setting
is canceled.
• The power cold is disconnected
or a power failure
occured.
Redo "Setting
the clock" (page 8). If you
have set the timer, redo "Waking
up to music"
(page 22) and "Timer recording
radio programs"
(page 23).
The radio
presetting
is canceled.
• The power cord is disconnected
o! a powe2 failure
occured for longer than half a day Redo
"Presetting
radio stations"
(page 13)
"
"
-" appears
in the display.
• A power faihue occmTed. Set the clock (page 8)
and timer settings
(page 21 to 24) again
There
is no sound.
• Turn MASTER
VOLUME
clockwise
(o! press
VOLUME
+ on the remote)
• Make sure the hea@hones
are not connected
to
the PHONES
jack.
• Check the speaker
connections
(page 6).
• There is no audio output dining Timer
Recording.
There
is no microphone
sound.
• Turn MASTER
VOLUME
(02 press
VOLUME
+,
on the remote
repeatedly)
or
MIC LEVEL
to adjust the microphone
volume.
• Make sure the microphone
is connected
to the
MIC 1 or MIC 2 jack correctly
There
is severe
hum or noise.
• A TV 02 VCR is placed too close to the refit. Move
the unit away fioln the TV or VCR.
• Move the unit away from the source of noise
• Connect
the trait to a different
wall outlet.
• Install a noise filter (commercially
available)
to
the power cord.
The timer
cannot
be set.
• Set the clock again (page 8)
The timer
does not function.
• Check the timer setting and set the correct time
(pages 22 to 24).
• Cancel
the Sleep Timer fimction
(page 21)
• You cannot select the Play Timer and Timer
Recording
simultaneously
c-
O
o
5'
(,Q
continued_
29_