Cisco ASA 5516-X Manual de instalación del hardware - Página 26

Navegue en línea o descargue pdf Manual de instalación del hardware para Hardware de red Cisco ASA 5516-X. Cisco ASA 5516-X 32 páginas. Threat defense reimage guide
También para Cisco ASA 5516-X: Manual de inicio rápido (8 páginas), Manual de instalación sencilla (11 páginas), Manual de inicio rápido (9 páginas), Manual de software (37 páginas), Montar y conectar (6 páginas), Manual (14 páginas)

Connect Cables, Turn on Power, and Verify Connectivity

We recommend that you install the chassis with the rear panel facing the cold aisle. (See the following illustration for

an example of air flow from back to front.)

Figure 18: Chassis Installed in the Rack

What to Do Next

You can now install the cables and power cord, as described in

Connectivity, on page

Connect Cables, Turn on Power, and Verify Connectivity

After positioning or mounting the ASA, follow these steps to connect cables, turn on power, and verify

connectivity:

Step 1

Connect the network cables:

a) Management interface – Using this Management 1/1 Gigabit Ethernet port, you can connect a management computer

directly with an Ethernet cable, or you can connect the computer and the ASA to the same management network. Be

sure the PC is configured to obtain an IP address using DHCP.

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide

22.

Mount and Connect

Connect Cables, Turn on Power, and Verify

Online Only