Cisco ASA 5516-X Manual de instalación del hardware - Página 31

Navegue en línea o descargue pdf Manual de instalación del hardware para Hardware de red Cisco ASA 5516-X. Cisco ASA 5516-X 32 páginas. Threat defense reimage guide
También para Cisco ASA 5516-X: Manual de inicio rápido (8 páginas), Manual de instalación sencilla (11 páginas), Manual de inicio rápido (9 páginas), Manual de software (37 páginas), Montar y conectar (6 páginas), Manual (14 páginas)

Maintenance and Upgrades

This chapter contains procedure for maintaining and upgrading the ASA, and contains the following sections:

•

As mentioned in

SSD should it fail; you do not need to power off the ASA to do so.

Follow these steps to replace a failed SSD in an ASA:

Step 1

Loosen the thumb screws on both sides of the SSD bay and pull the existing SSD out of the bay.

Step 2

Insert the new SSD into the bay and push it in until it is seated.

Step 3

Tighten the thumb screws on both sides of the SSD bay.

Step 4

Check the SSD LED to make sure the SSD is seated properly and functioning. See

of the SSD LED.

Online Only

Replace the SSD , page 27

Solid State Drive, on page

C H A P T E R

7, the ASA ships with an SSD installed. You can replace this

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide

LEDs, on page 4

for a description