Cisco ASA 5516-X Panduan Pemasangan Perangkat Keras - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Perangkat Keras Jaringan Cisco ASA 5516-X. Cisco ASA 5516-X 32 halaman. Threat defense reimage guide
Juga untuk Cisco ASA 5516-X: Panduan Memulai Cepat (8 halaman), Panduan Penyiapan yang Mudah (11 halaman), Panduan Memulai Cepat (9 halaman), Manual Perangkat Lunak (37 halaman), Pasang dan Hubungkan (6 halaman), Manual (14 halaman)

Maintenance and Upgrades

This chapter contains procedure for maintaining and upgrading the ASA, and contains the following sections:

•

As mentioned in

SSD should it fail; you do not need to power off the ASA to do so.

Follow these steps to replace a failed SSD in an ASA:

Step 1

Loosen the thumb screws on both sides of the SSD bay and pull the existing SSD out of the bay.

Step 2

Insert the new SSD into the bay and push it in until it is seated.

Step 3

Tighten the thumb screws on both sides of the SSD bay.

Step 4

Check the SSD LED to make sure the SSD is seated properly and functioning. See

of the SSD LED.

Online Only

Replace the SSD , page 27

Solid State Drive, on page

C H A P T E R

7, the ASA ships with an SSD installed. You can replace this

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide

LEDs, on page 4

for a description