Cisco ASA 5585-X Manual de inicio rápido - Página 29
Navegue en línea o descargue pdf Manual de inicio rápido para Hardware de red Cisco ASA 5585-X. Cisco ASA 5585-X 40 páginas. Maintenance and upgrade procedures
También para Cisco ASA 5585-X: Manual de inicio rápido (6 páginas), Manual de mantenimiento (44 páginas)
Imprimir página
Chapter 5
Installing the ASA 5585-X
Step 2
Step 3
Step 4
Connecting Interface Cables and Verifying Interface
Connectivity
Step 1
78-19753-01
1
Cisco ASA 1200W AC
100-240V
15.0/8.0.A
56/60Hz
Power Supply Module (PS0)
1
Connect the power cables to the electrical outlets.
Power on the ASA. If you have redundant power supplies, you must power on both
modules.
Check the Power LED on the front of the ASA; the AC ON indicator should be
green, the FAN ON indicator should be green, and the OUT OK indicator should
be off.
Connect a management PC to the core SSP Management 0/0 interface for use with
the Adaptive Security Device Manager (ASDM).You can connect it directly with
an Ethernet cable, or connect the PC and the ASA to the same management
network.
The ASA 5585-X has 2 management interfaces (Management 0/0 and
Note
Management 0/1); however, only Management 0/0 is configured for use.
Connecting Interface Cables and Verifying Interface Connectivity
Power Supply Module (PS1)
2
Cisco ASA 5580 Series Quick Start Guide
2
Cisco ASA 1200W AC
100-240V
15.0/8.0.A
56/60Hz
5-3