Cisco ASR 9000 Series Manual - Página 22
Navegue en línea o descargue pdf Manual para Hardware de red Cisco ASR 9000 Series. Cisco ASR 9000 Series 44 páginas. Line card
También para Cisco ASR 9000 Series: Configuración de los ajustes de red (26 páginas), Manual de configuración (46 páginas), Manual de configuración (50 páginas), Manual (24 páginas), Configuración de (46 páginas), Manual de consulta rápida (7 páginas)
Imprimir página
- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Removing an AC or DC Power Tray from a Cisco ASR 9000 Series Router
Figure 14: Removing the Front Power Tray Bezel on the Cisco ASR 9922 Router
Step 5
For the Cisco ASR 9912 Router, the vented power tray bezel is a base chassis accessory that snaps onto the
front of the power system. comes with ball studs already installed. Remove it by pulling it away from the
chassis
(Figure
Step 6
Loosen and remove the four screws (two screws at each end) that attach the power tray to the chassis.
Step 7
Loosen the two captive screws (one per ejector lever) to release the ejector levers. The Removing a Power
Tray—Version 1 Power Tray figure shows the process for the version 1 power trays, and the figure Removing
a Power Tray –Version 2 Power Tray shows the process for the version 2 power trays. The process for version
3 power trays is similar to the process for version 2 power trays, as shown in figure Removing a Power Tray
–Version 2 Power Tray .
Figure 15: Removing a Power Tray Version 1 Power Tray (Cisco ASR 9010 Router Shown)
Replacing Cisco ASR 9000 Series Router Components
22
1).
Replacing Cisco ASR 9000 Series Router Components