- ページ 22

ネットワーク・ハードウェア Cisco ASR 9000 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASR 9000 Series 44 ページ。 Line card
Cisco ASR 9000 Series にも：ネットワーク設定の構成 (26 ページ), 設定マニュアル (46 ページ), 設定マニュアル (50 ページ), マニュアル (24 ページ), 設定 (46 ページ), クイック・リファレンス・マニュアル (7 ページ)

Removing an AC or DC Power Tray from a Cisco ASR 9000 Series Router

Figure 14: Removing the Front Power Tray Bezel on the Cisco ASR 9922 Router

Step 5

For the Cisco ASR 9912 Router, the vented power tray bezel is a base chassis accessory that snaps onto the

front of the power system. comes with ball studs already installed. Remove it by pulling it away from the

chassis

(Figure

Step 6

Loosen and remove the four screws (two screws at each end) that attach the power tray to the chassis.

Step 7

Loosen the two captive screws (one per ejector lever) to release the ejector levers. The Removing a Power

Tray—Version 1 Power Tray figure shows the process for the version 1 power trays, and the figure Removing

a Power Tray –Version 2 Power Tray shows the process for the version 2 power trays. The process for version

3 power trays is similar to the process for version 2 power trays, as shown in figure Removing a Power Tray

–Version 2 Power Tray .

Figure 15: Removing a Power Tray Version 1 Power Tray (Cisco ASR 9010 Router Shown)

Replacing Cisco ASR 9000 Series Router Components

1).

Replacing Cisco ASR 9000 Series Router Components