Cisco ATA 191 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Hardware de red Cisco ATA 191. Cisco ATA 191 40 páginas. Analog telephone adapter
También para Cisco ATA 191: Manual del usuario (30 páginas), Manual de administración (4 páginas), Manual del usuario (10 páginas), Comenzar (8 páginas), Manual (10 páginas), Manual de inicio rápido (13 páginas), Manual de instalación (6 páginas), Manual del usuario (30 páginas)

Your ATA

Figure 2: ATA 191 Back Panel

Figure 3: ATA 192 Back Panel

Table 2: ATA 191 and ATA 192 Back Panel Items

Item

RESET

PHONE 1

PHONE 2

ETHERNET (ATA 192 only)

NETWORK

DC 5V POWER

Description

To restart the ATA, use a paper clip or similar object to press this button

briefly.

To restore the factory default settings, press and hold for about 10

seconds.

The LED behaviour for the factory reset:

1. After you press and hold the button for about 10 seconds, the Power

LED is fast flashing green.

2. After the factory reset is performed successfully, all LEDs are fast

flashing green for about 5 seconds.

Use an RJ-11 phone cable to connect an analog phone or fax machine.

Use an RJ-11 phone cable to connect a second analog phone or fax

machine.

Use an Ethernet cable to connect your ATA to a device on your network,

such as a computer.

Use an Ethernet cable to connect to the network.

Use the power adapter that was provided to connect to a power source.

Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware

ATA 191 and ATA 192 Back Panel