Cisco ATA 191 User Manual - Page 11

Browse online or download pdf User Manual for Network Hardware Cisco ATA 191. Cisco ATA 191 40 pages. Analog telephone adapter
Also for Cisco ATA 191: User Manual (30 pages), Administration Manual (4 pages), User Manual (10 pages), Get Started (8 pages), Manual (10 pages), Quick Start Manual (13 pages), Setup Manual (6 pages), User Manual (30 pages)

Print Page
Cisco ATA 191 User Manual
Your ATA
Figure 2: ATA 191 Back Panel
Figure 3: ATA 192 Back Panel
Table 2: ATA 191 and ATA 192 Back Panel Items
Item
RESET
PHONE 1
PHONE 2
ETHERNET (ATA 192 only)
NETWORK
DC 5V POWER
Description
To restart the ATA, use a paper clip or similar object to press this button
briefly.
To restore the factory default settings, press and hold for about 10
seconds.
The LED behaviour for the factory reset:
1. After you press and hold the button for about 10 seconds, the Power
LED is fast flashing green.
2. After the factory reset is performed successfully, all LEDs are fast
flashing green for about 5 seconds.
Use an RJ-11 phone cable to connect an analog phone or fax machine.
Use an RJ-11 phone cable to connect a second analog phone or fax
machine.
Use an Ethernet cable to connect your ATA to a device on your network,
such as a computer.
Use an Ethernet cable to connect to the network.
Use the power adapter that was provided to connect to a power source.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
ATA 191 and ATA 192 Back Panel
5