Cisco Cisco MDS 9216A - Fabric Switch Manual de configuración - Página 25

Navegue en línea o descargue pdf Manual de configuración para Hardware de red Cisco Cisco MDS 9216A - Fabric Switch. Cisco Cisco MDS 9216A - Fabric Switch 49 páginas. Multilayer fabric switch
También para Cisco Cisco MDS 9216A - Fabric Switch: Nota de publicación (48 páginas), Nota de publicación (44 páginas), Nota de publicación (44 páginas), Nota de publicación (36 páginas), Nota de publicación (26 páginas), Nota de publicación (22 páginas), Manual de consulta rápida (14 páginas), Nota de publicación (3 páginas), Especificación (15 páginas)

Presenting EVA LUNs to the iSCSI initiator

After the iSCSI Initiator connects to the EVA controller, the EVA recognizes the iSCSI Initiator WWPN that

was mapped from the C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2),, or MDS 9216i switch as if it were a Fibre Channel HBA. The EVA can use the iSCSI Initiator

WWPN to create a host entry and present LUNs to the host entry.

NOTE:

This section describes conﬁguring LUNs on an EVA. For conﬁguring LUNs on other storage products,

refer to the procedures described in the product documentation.

The EVA is managed and conﬁgured with Command View EVA.

To create an EVA host entry:

Select the Storage Array icon and click the Hosts folder

Figure 14 Host Folder—Add host

Click Add host.

The Add a Host window appears

(Figure

15).

14).

C-Series iSCSI