Cisco Cisco MDS 9216A - Fabric Switch Yapılandırma Kılavuzu - Sayfa 25

Ağ Donanımı Cisco Cisco MDS 9216A - Fabric Switch için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco Cisco MDS 9216A - Fabric Switch 49 sayfaları. Multilayer fabric switch
Ayrıca Cisco Cisco MDS 9216A - Fabric Switch için: Yayın Notu (48 sayfalar), Yayın Notu (44 sayfalar), Yayın Notu (44 sayfalar), Yayın Notu (36 sayfalar), Yayın Notu (26 sayfalar), Yayın Notu (22 sayfalar), Hızlı Referans Kılavuzu (14 sayfalar), Yayın Notu (3 sayfalar), Şartname (15 sayfalar)

Sayfayı Yazdır

Cisco Cisco MDS 9216A - Fabric Switch Yapılandırma Kılavuzu

Presenting EVA LUNs to the iSCSI initiator

After the iSCSI Initiator connects to the EVA controller, the EVA recognizes the iSCSI Initiator WWPN that

was mapped from the C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2),, or MDS 9216i switch as if it were a Fibre Channel HBA. The EVA can use the iSCSI Initiator

WWPN to create a host entry and present LUNs to the host entry.

NOTE:

This section describes conﬁguring LUNs on an EVA. For conﬁguring LUNs on other storage products,

refer to the procedures described in the product documentation.

The EVA is managed and conﬁgured with Command View EVA.

To create an EVA host entry:

Select the Storage Array icon and click the Hosts folder

Figure 14 Host Folder—Add host

Click Add host.

The Add a Host window appears

(Figure

15).

14).

C-Series iSCSI