Cisco Gigabit Switch Router Cisco 12012 Manual de instrucciones de sustitución - Página 8

Navegue en línea o descargue pdf Manual de instrucciones de sustitución para Hardware de red Cisco Gigabit Switch Router Cisco 12012. Cisco Gigabit Switch Router Cisco 12012 34 páginas. Gigabit switch router cablemanagement kit
También para Cisco Gigabit Switch Router Cisco 12012: Manual de instrucciones de sustitución (6 páginas), Ficha de datos (9 páginas), Manual de instrucciones de sustitución (20 páginas), Manual de instrucciones de instalación (14 páginas)

Removing and Replacing a Card Cage Assembly

Removing an AC-Input Power Supply

Perform the following steps to remove an AC-input power supply:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Figure 2

8 Cisco 12012 Gigabit Switch Router Card Cage Assembly Replacement Instructions

Attach an antistatic wrist strap to yourself and to one of the two ESD connection sockets

located on the front edges of the upper card cage or to bare metal on the frame.

If you have not already done so, turn the power supply power switch to the STANDBY

position on the power supply you want to remove. (Refer to Figure 2a.)

Turning the power supply switch to STANDBY also releases a latch that secures

Note

the power supply in the power supply bay slot.

Release the spring clip on the power supply faceplate. (Refer to Figure 2b.)

Disconnect the AC power cord from the power supply AC receptacle. (Refer to

Figure 2c.)

Disconnect the AC power cord from the source AC receptacle. (Refer to Figure 2d.)

Loosen the captive screw on the power supply faceplate. (Refer to Figure 2e.)

Disconnecting an AC-Input Power Supply

Release

spring clip

Disconnect

power cord

Disconnect

power cord from

source AC

Turn power

switch to

standby

position ( )

INPUT:

200 - 240V

10 A

50/60 HZ

2000 W

OUTPUT

FAIL

Loosen

captive

screw