Cisco Gigabit Switch Router Cisco 12012 Manual de instrucciones de instalación

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Hardware de red Cisco Gigabit Switch Router Cisco 12012. Cisco Gigabit Switch Router Cisco 12012 14 páginas. Gigabit switch router cablemanagement kit
También para Cisco Gigabit Switch Router Cisco 12012: Manual de instrucciones de sustitución (34 páginas), Manual de instrucciones de sustitución (6 páginas), Ficha de datos (9 páginas), Manual de instrucciones de sustitución (20 páginas)

Doc. No.

78-4346-02

Cisco 12012 Gigabit Switch Router Cable-

Management Kit Installation Instructions

Product Numbers: ACS-GSR12-CCBLM=, ACS-GSR-LCCBLM=

Document Order Number: DOC-784346=

This document contains instructions for installing or replacing cable-management kit components in

the Cisco 12012 Gigabit Switch Router (GSR).

The sections in this document include the following:

•

Product Overview, page 1

•

Safety Guidelines, page 4

•

Tools and Parts Required, page 5

•

Removing and Replacing the Cable-Management System, page 6

•

FCC Class A Compliance, page 12

•

Cisco Connection Online, page 13

Product Overview

The Cisco 12012 has two card cages; the upper card cage and the lower card cage. (Refer to

Figure 1.) The upper card cage has 12 user-configurable slots available for line cards and a route

processor (RP). One additional slot (rightmost slot) in the upper card cage is non-configurable; it is

reserved for an alarm card. The line cards and the RP are not slot dependent; you can install the line

cards and the RP in any of the first 12 available slots.

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

Cisco Systems, Inc.