Cisco Gigabit Switch Router Cisco 12012 Handleiding voor installatie-instructies

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Cisco Gigabit Switch Router Cisco 12012. Cisco Gigabit Switch Router Cisco 12012 14 pagina's. Gigabit switch router cablemanagement kit
Ook voor Cisco Gigabit Switch Router Cisco 12012: Handleiding vervangende instructies (34 pagina's), Handleiding vervangende instructies (6 pagina's), Gegevensblad (9 pagina's), Handleiding vervangende instructies (20 pagina's)

Doc. No.

78-4346-02

Cisco 12012 Gigabit Switch Router Cable-

Management Kit Installation Instructions

Product Numbers: ACS-GSR12-CCBLM=, ACS-GSR-LCCBLM=

Document Order Number: DOC-784346=

This document contains instructions for installing or replacing cable-management kit components in

the Cisco 12012 Gigabit Switch Router (GSR).

The sections in this document include the following:

•

Product Overview, page 1

•

Safety Guidelines, page 4

•

Tools and Parts Required, page 5

•

Removing and Replacing the Cable-Management System, page 6

•

FCC Class A Compliance, page 12

•

Cisco Connection Online, page 13

Product Overview

The Cisco 12012 has two card cages; the upper card cage and the lower card cage. (Refer to

Figure 1.) The upper card cage has 12 user-configurable slots available for line cards and a route

processor (RP). One additional slot (rightmost slot) in the upper card cage is non-configurable; it is

reserved for an alarm card. The line cards and the RP are not slot dependent; you can install the line

cards and the RP in any of the first 12 available slots.

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

Cisco Systems, Inc.