Cisco Gigabit Switch Router Cisco 12012 Panduan Petunjuk Instalasi
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Perangkat Keras Jaringan Cisco Gigabit Switch Router Cisco 12012. Cisco Gigabit Switch Router Cisco 12012 14 halaman. Gigabit switch router cablemanagement
kit
Juga untuk Cisco Gigabit Switch Router Cisco 12012: Manual Petunjuk Penggantian (34 halaman), Manual Petunjuk Penggantian (6 halaman), Lembar data (9 halaman), Manual Petunjuk Penggantian (20 halaman)
Halaman Cetak
Doc. No.
78-4346-02
Cisco 12012 Gigabit Switch Router Cable-
Management Kit Installation Instructions
Product Numbers: ACS-GSR12-CCBLM=, ACS-GSR-LCCBLM=
Document Order Number: DOC-784346=
This document contains instructions for installing or replacing cable-management kit components in
the Cisco 12012 Gigabit Switch Router (GSR).
The sections in this document include the following:
•
Product Overview, page 1
•
Safety Guidelines, page 4
•
Tools and Parts Required, page 5
•
Removing and Replacing the Cable-Management System, page 6
•
FCC Class A Compliance, page 12
•
Cisco Connection Online, page 13
Product Overview
The Cisco 12012 has two card cages; the upper card cage and the lower card cage. (Refer to
Figure 1.) The upper card cage has 12 user-configurable slots available for line cards and a route
processor (RP). One additional slot (rightmost slot) in the upper card cage is non-configurable; it is
reserved for an alarm card. The line cards and the RP are not slot dependent; you can install the line
cards and the RP in any of the first 12 available slots.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1997-2002
Cisco Systems, Inc.
All rights reserved.
1