Digitrax BXP88 Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Sensores de seguridad Digitrax BXP88. Digitrax BXP88 16 páginas.

10.0 Occupancy/Transponding Indication

The BXP88 can report occupancy and Transponding information via the LocoNet

connection or via direct output to a user created LED panel.

10.1 LocoNet Devices

The BXP88 provides occupancy and transponding messages to LocoNet that can

be used by computer software for a visual display of occupancy and transponding

status on the layout or to other devices on the layout. For instance layout control

software can use these messages to control signals on the layout via a Digitrax

SE8c. See the operating manual of your computer software or the SE8C for de-

tails on installation and operation.

10.2 LT5 Tester

The BXP88 provides two LT5 LED compatible outputs labeled "DS1-4 LEDS"

and "DS5-8 LEDS" and the supplied LT5 tester can be plugged in here to provide

visible detection section, power state and fault information for setup, debug and

running. This will help you with layout wiring and troubleshooting for transpon-

ding & detection.

LT5 Indications

Detection Section LED on Solid

Detection Section LED is Blinking Slow

Detection Section LED is Blinking Fast

Zone LED is on Solid

Zone LED off blinking on once repeating

every 2 seconds

Zone LED off blinking on twice repeating

every 2 seconds

Zone LED off blinking on 3 times repeating

every 2 seconds

Zone LED off blinking on 4 times repeating

every 2 seconds

Note: When a fault is detected a detection sections will show and report as Oc-

cupied and detection section LEDS will be lit. This is the default fail-safe logic,

reporting can be changed with OpSw 15.

Table 2: LT5 LED Indications

— 11 —

Meaning

Detection Section is Occupied

Detection Section is Occupied and Tran-

sponding

Detection Section is in Short Circuit

Normal Operation, no faults

Track Power is off, RailSync not detected

Rail A or Rail B unpowered

Internal Voltage Problem

LocoNet Error or Disconnected