Cisco PIX-515E Manual de inicio rápido - Página 24

Navegue en línea o descargue pdf Manual de inicio rápido para Hardware de red Cisco PIX-515E. Cisco PIX-515E 42 páginas. Security appliance
También para Cisco PIX-515E: Manual de inicio rápido (42 páginas)

Imprimir página

To specify a local host or network to be allowed access to the IPSec tunnel, complete the following

steps:

1. Click IP Address.

2. Specify whether the interface is inside or outside by choosing one of the interfaces from the

drop-down menu.

3. Enter the IP address and mask.

4. Click Add.

5. Repeat steps 1 through step 5 for each host or network that you want to have access to the tunnel.

6. Click the Next button to continue.

Step 6: Specify Remote Hosts and Networks

Identify hosts and networks at the remote site to be allowed to use this IPSec tunnel to communicate

with the local hosts and networks you identified in Step 5. Add or remove hosts and networks

dynamically from the Selected panel by clicking on the >> or << buttons respectively. In the current

scenario, for PIX 1, the remote network is Network B (20.20.20.0), so traffic encrypted from this

network is permitted through the tunnel.