Cisco Prisma EtherLinX Manual de instrucciones de instalación - Página 28
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Hardware de red Cisco Prisma EtherLinX. Cisco Prisma EtherLinX 38 páginas.
Imprimir página
Device-Specific Configuration
Introduction
The Prisma EtherLinX unit also includes the following device-specific options:
Option
IfStats
RmStats
cleandb
download
version
vlan
reboot
security
accounts
port
dlSecure *
dl_Open *
* Perform a reboot after using the dlSecure and dl_Open commands.
1.
From the Command List section of the Main Configuration screen (serial
configuration/Telnet session), press the Space Bar.
2.
Type the name of the action you want to do (as shown above) and press
Enter.
28
Displays Ethernet statistics.
Displays RMON statistics.
Reboot with clean database.
Result: This removes all information in the database except
IP address of device
Downloads firmware from central server via TFTP protocol.
Displays the serial number and build date.
Displays and changes VLAN settings. Refer to Configuring
VLAN IDs later in this document.
Reboots the unit.
Allows ARP request configuration.
Allows addition/deletion of Username/Password accounts.
Administrators must maintain a password list.
Displays port status values and allows some configuration.
Refer to Port Configuration later in this document
Downlink ports are isolated from one another (i.e., there is no
communication between downlink ports).
Downlink ports can communicate with each other.
Description
Continued on next page
4008226 Rev B