Cisco TelePresence Server 7010 Manual de instalación - Página 8

Navegue en línea o descargue pdf Manual de instalación para Hardware de red Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 14 páginas. 600w ac-input power supply and fan tray replacement
También para Cisco TelePresence Server 7010: Manual de instrucciones de sustitución (23 páginas), Manual de instrucciones de instalación (15 páginas), Primeros pasos (16 páginas), Manual de instrucciones de sustitución (18 páginas)

Configuring the TelePresence Server

For example, to assign an address of 192.168.1.2 where the default gateway is at 192.168.1.1, enter:

static A 192.168.1.2 255.255.255.0 192.168.1.1 0.0.0.0

To manually specify a DNS server, use this command:

dns <DNS server address> [<secondary DNS server>][<domain>]

To revert to using DHCP after setting a static IPv4 address, use the following command:

dhcp -4 A

For information on assigning a static IPv6 address type help static. For information on assigning an

automatic IPv6 address type help dhcp or else see the online help.

Task 6: Discover the IP address of the TelePresence Server

1. To display the current status of the IP address, enter: status

If you have DHCP enabled on your network and you are allowing the TelePresence Server to acquire its

address using DHCP, the IP address that has been acquired by Ethernet Port A will be shown; if you

have assigned a static IP address, that is the address that will be shown.

2. Make a note of the IP address. You will use this to access the web interface of the unit.

Note: When your TelePresence Server has an IP address, you can add an entry for it on your DNS server

and use a hostname to access the device's web interface.

Note: The front panel LCD will show the IP address assigned.

To log in to the web interface of the device:

1. Use your browser to navigate to the IP address or hostname of the unit.

2. Enter the user name admin with no password, and click Log in.

The

Status

page is displayed.

Note: We recommend that you change the admin account to use a password as soon as possible. To do

that, go to

Configuration > Change password

Cisco TelePresence Server 7010 Installation Guide

and type in the new password twice.

Page 8 of 14