Cisco TelePresence Server 7010 설치 매뉴얼 - 페이지 8
{카테고리_이름} Cisco TelePresence Server 7010에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence Server 7010 14 페이지. 600w ac-input power supply and fan tray replacement
Cisco TelePresence Server 7010에 대해서도 마찬가지입니다: 교체 지침 매뉴얼 (23 페이지), 설치 지침 매뉴얼 (15 페이지), 시작하기 (16 페이지), 교체 지침 매뉴얼 (18 페이지)
페이지 인쇄
Configuring the TelePresence Server
For example, to assign an address of 192.168.1.2 where the default gateway is at 192.168.1.1, enter:
static A 192.168.1.2 255.255.255.0 192.168.1.1 0.0.0.0
To manually specify a DNS server, use this command:
n
dns <DNS server address> [<secondary DNS server>][<domain>]
To revert to using DHCP after setting a static IPv4 address, use the following command:
n
dhcp -4 A
For information on assigning a static IPv6 address type help static. For information on assigning an
i
automatic IPv6 address type help dhcp or else see the online help.
Task 6: Discover the IP address of the TelePresence Server
1. To display the current status of the IP address, enter: status
If you have DHCP enabled on your network and you are allowing the TelePresence Server to acquire its
address using DHCP, the IP address that has been acquired by Ethernet Port A will be shown; if you
have assigned a static IP address, that is the address that will be shown.
2. Make a note of the IP address. You will use this to access the web interface of the unit.
Note: When your TelePresence Server has an IP address, you can add an entry for it on your DNS server
and use a hostname to access the device's web interface.
Note: The front panel LCD will show the IP address assigned.
Task 7: Log in to the TelePresence Server
To log in to the web interface of the device:
1. Use your browser to navigate to the IP address or hostname of the unit.
2. Enter the user name admin with no password, and click Log in.
The
Status
page is displayed.
Note: We recommend that you change the admin account to use a password as soon as possible. To do
that, go to
Configuration > Change password
Cisco TelePresence Server 7010 Installation Guide
and type in the new password twice.
Page 8 of 14