Cisco UCS B200 M3 Manual de instalación - Página 21

Navegue en línea o descargue pdf Manual de instalación para Hardware de red Cisco UCS B200 M3. Cisco UCS B200 M3 34 páginas. Blade server
También para Cisco UCS B200 M3: Nota de instalación y mantenimiento (36 páginas), Nota de instalación y mantenimiento (37 páginas), Manual (8 páginas), Manual de actualización (21 páginas), Nota de instalación y mantenimiento (28 páginas)

Step 6

Close the socket latch. See callout 1 in the following figure.

Step 7

Secure the first hook, which has the following icon:

Step 8

Secure the second hook, which has the following icon:

Figure 16: Replacing the Heat Sink (B200 M3 Shown)

Step 9

Using the syringe of thermal grease provided with replacement CPUs and servers (UCS-CPU-GREASE=), add 2 cubic

centimeters of thermal grease to the top of the CPU where it will contact the heat sink. Use the pattern shown. This should

require half the contents of the syringe.

The thermal grease has very specific thermal properties, and thermal grease from other sources should not be

Caution

substituted. Using other thermal grease may lead to damage.

Note

CPU spares come with two syringes of thermal grease; one with a blue cap and one with a red cap. The syringe

with the blue cap is UCS-CPU-GREASE=, which is used with this server

See callout 2 in the following figure.

See callout 3 in the following figure.