Cisco UCS B200 M3 Installation Manual - Page 21

Browse online or download pdf Installation Manual for Network Hardware Cisco UCS B200 M3. Cisco UCS B200 M3 34 pages. Blade server
Also for Cisco UCS B200 M3: Installation And Service Note (36 pages), Installation And Service Note (37 pages), Manual (8 pages), Upgrade Manual (21 pages), Installation And Service Note (28 pages)

Print Page

Step 6

Close the socket latch. See callout 1 in the following figure.

Step 7

Secure the first hook, which has the following icon:

Step 8

Secure the second hook, which has the following icon:

Figure 16: Replacing the Heat Sink (B200 M3 Shown)

Step 9

Using the syringe of thermal grease provided with replacement CPUs and servers (UCS-CPU-GREASE=), add 2 cubic

centimeters of thermal grease to the top of the CPU where it will contact the heat sink. Use the pattern shown. This should

require half the contents of the syringe.

The thermal grease has very specific thermal properties, and thermal grease from other sources should not be

Caution

substituted. Using other thermal grease may lead to damage.

Note

CPU spares come with two syringes of thermal grease; one with a blue cap and one with a red cap. The syringe

with the blue cap is UCS-CPU-GREASE=, which is used with this server

See callout 2 in the following figure.

See callout 3 in the following figure.