Cisco UCS B200 M3 Manual de instalación - Página 31

Navegue en línea o descargue pdf Manual de instalación para Hardware de red Cisco UCS B200 M3. Cisco UCS B200 M3 34 páginas. Blade server
También para Cisco UCS B200 M3: Nota de instalación y mantenimiento (36 páginas), Nota de instalación y mantenimiento (37 páginas), Manual (8 páginas), Manual de actualización (21 páginas), Nota de instalación y mantenimiento (28 páginas)

Procedure

Step 1

Enable Quiet Mode in the BIOS policy of the server's Service Profile.

Step 2

Establish a direct connection to the server, either by connecting a keyboard, monitor, and mouse to the front panel using

a KVM dongle (N20-BKVM) or by other means.

Step 3

Reboot the server.

Step 4

Press F2 during reboot to enter the BIOS setup screens.

Step 5

On the Advanced tab, select Trusted Computing and press Enter.

Step 6

Set the TPM Support option to Enable.

Step 7

Press F10 to save and exit. Allow the server to finish booting.

Server Troubleshooting

For general troubleshooting information, see the see the

Cisco UCS blade servers are intended to be configured and managed using Cisco UCS Manager. For details, see the Configuration

Guide for the version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL:

/www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html

Specification

Height

Width

Depth

Weight