Epson 2580 - Perfection PHOTO Manual de inicio rápido - Página 6

Imprimir página

Epson 2580 - Perfection PHOTO Manual de inicio rápido

Perfection 2580 Photo

If you have the Perfection 2580 Photo, the top of the cover has an automatic film

loader that lets you load 35 mm negatives without even opening the scanner

cover. You can use the slide holder to scan a 35 mm slide from the scanner glass.

Before scanning negatives or a slide, lift the scanner

cover all the way up and slide the reflective

document mat up and off of the scanner cover.

Note: Make sure the transparency

unit cable is connected to the back

of the scanner (see step 4 in

"Connect the Scanner").

Scanning 35 mm Negatives

Close the scanner cover.

Press and release the back of

the auto film loader cover to

open it.

Flip out the metal film guide and

press it down until it clicks into

place.

Caution: Before loading a film

strip, make sure it contains at

least 2 photos, but no more

than 6. Don't load folded or

creased film into the auto film

loader or it may damage the film

or your scanner.

Place the film strip in the film

loader with the shiny base side

facing down. Your images and

any wording on the film strip

should appear backwards on the

side that faces up.

Slowly slide the film into the

loader. Let go of the film when

the scanner begins to

automatically feed it into

position.

To scan each frame in your film strip as a separate image, press the 4 Scan

and Save button or open Epson Smart Panel and select Scan and Save.

This scans each frame using ideal settings in Full Auto Mode and opens

each one separately in ArcSoft PhotoImpression for viewing, editing, and

printing. See your on-screen Reference Guide and Smart Panel help for

instructions on selecting scan modes and complete scanning details.

When you finish scanning the film strip, press the Eject button inside the

auto film loader to eject the film. Wait for the ] Start light to stay on green,

then remove the film strip.

Caution: Don't turn off the scanner with a film strip loaded in the auto film

loader. Never pull film out of the loader by force.

Flip the film guide back inside the auto film loader and press it down until it

clicks into place.

Close the auto film loader cover.

Replace the document mat before you resume scanning reflective (paper)

documents.