- ページ 6

スキャナー Epson 2580 - Perfection PHOTOのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Epson 2580 - Perfection PHOTO 8 ページ。 Scanning application force quits on mac os 10.4
Epson 2580 - Perfection PHOTO にも: 製品サポート速報 (1 ページ), ユーザーマニュアル (6 ページ), リリースノート (1 ページ), 製品サポート速報 (23 ページ), マニュアル (11 ページ), 更新 (1 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (24 ページ), 製品サポート速報 (29 ページ), 製品サポート速報 (8 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (14 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (11 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (21 ページ)

Epson 2580 - Perfection PHOTO クイック・スタート・マニュアル
Perfection 2580 Photo
If you have the Perfection 2580 Photo, the top of the cover has an automatic film
loader that lets you load 35 mm negatives without even opening the scanner
cover. You can use the slide holder to scan a 35 mm slide from the scanner glass.
Before scanning negatives or a slide, lift the scanner
cover all the way up and slide the reflective
document mat up and off of the scanner cover.
Note: Make sure the transparency
unit cable is connected to the back
of the scanner (see step 4 in
"Connect the Scanner").
Scanning 35 mm Negatives
1
Close the scanner cover.
2
Press and release the back of
the auto film loader cover to
open it.
3
Flip out the metal film guide and
press it down until it clicks into
place.
Caution: Before loading a film
strip, make sure it contains at
least 2 photos, but no more
than 6. Don't load folded or
creased film into the auto film
loader or it may damage the film
or your scanner.
4
Place the film strip in the film
loader with the shiny base side
facing down. Your images and
any wording on the film strip
should appear backwards on the
side that faces up.
Slowly slide the film into the
loader. Let go of the film when
the scanner begins to
automatically feed it into
position.
5
To scan each frame in your film strip as a separate image, press the 4 Scan
and Save button or open Epson Smart Panel and select Scan and Save.
This scans each frame using ideal settings in Full Auto Mode and opens
each one separately in ArcSoft PhotoImpression for viewing, editing, and
printing. See your on-screen Reference Guide and Smart Panel help for
instructions on selecting scan modes and complete scanning details.
6
When you finish scanning the film strip, press the Eject button inside the
auto film loader to eject the film. Wait for the ] Start light to stay on green,
then remove the film strip.
Caution: Don't turn off the scanner with a film strip loaded in the auto film
loader. Never pull film out of the loader by force.
7
Flip the film guide back inside the auto film loader and press it down until it
clicks into place.
8
Close the auto film loader cover.
9
Replace the document mat before you resume scanning reflective (paper)
documents.