Cisco 2500 Series Manual de instalación
Navegue en línea o descargue pdf Manual de instalación para Servidor Cisco 2500 Series. Cisco 2500 Series 12 páginas. Wireless controller
También para Cisco 2500 Series: Manual de configuración (19 páginas), Manual de implantación (23 páginas), Manual de configuración (50 páginas), Manual de introducción (47 páginas)
Imprimir página
Doc. No.
78-4144-01
Installing Cisco AC and DC Power Supplies in
Cisco 2500 Series Routers
Product Numbers: PWR-2500-AC=, PWR-2500-DC=
This document describes how to replace the AC or DC power supply in Cisco 2500 series routers.
The AC and DC power supplies are spare parts items. The replacement of the power supply requires
removing the existing power supply and installing the replacement power supply. This procedure
does not apply to the Cisco 2517, 2518, or 2519 versions of the Cisco 2500 series routers.
This document includes the following sections:
•
Required Tools and Equipment, page 2
•
Removing the Cover, page 2
•
•
•
Replacing the Cover, page 6
•
Obtaining Service and Support, page 11
•
Cisco Connection Online, page 11
Warning
Before you work on any equipment, you must be aware of the hazards involved with the electrical
circuitry and familiar with standard practices for preventing accidents. (To see translated versions of
this warning, refer to the Regulatory Compliance and Safety Information document that
accompanied the router.)
Warning
equipment. (To see translated versions of this warning, refer to the Regulatory Compliance and
Safety Information document that accompanied the router.)
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1997
Cisco Systems, Inc.
All rights reserved.
This waning symbol means danger. You are in a situation that could cause bodily injury.
Only trained and qualified personnel should be allowed to install or replace this
1