Cisco 2500 Series Посібник з встановлення
Переглянути онлайн або завантажити pdf Посібник з встановлення для Сервер Cisco 2500 Series. Cisco 2500 Series 12 сторінок. Wireless controller
Також для Cisco 2500 Series: Посібник з конфігурації (19 сторінок), Посібник з розгортання (23 сторінок), Посібник з конфігурації (50 сторінок), Посібник для початківців (47 сторінок)
Друкувати сторінку
Doc. No.
78-4144-01
Installing Cisco AC and DC Power Supplies in
Cisco 2500 Series Routers
Product Numbers: PWR-2500-AC=, PWR-2500-DC=
This document describes how to replace the AC or DC power supply in Cisco 2500 series routers.
The AC and DC power supplies are spare parts items. The replacement of the power supply requires
removing the existing power supply and installing the replacement power supply. This procedure
does not apply to the Cisco 2517, 2518, or 2519 versions of the Cisco 2500 series routers.
This document includes the following sections:
•
Required Tools and Equipment, page 2
•
Removing the Cover, page 2
•
•
•
Replacing the Cover, page 6
•
Obtaining Service and Support, page 11
•
Cisco Connection Online, page 11
Warning
Before you work on any equipment, you must be aware of the hazards involved with the electrical
circuitry and familiar with standard practices for preventing accidents. (To see translated versions of
this warning, refer to the Regulatory Compliance and Safety Information document that
accompanied the router.)
Warning
equipment. (To see translated versions of this warning, refer to the Regulatory Compliance and
Safety Information document that accompanied the router.)
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1997
Cisco Systems, Inc.
All rights reserved.
This waning symbol means danger. You are in a situation that could cause bodily injury.
Only trained and qualified personnel should be allowed to install or replace this
1