Cisco Nexus 7000 Series Configuración de - Página 3

Navegue en línea o descargue pdf Configuración de para Servidor Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 8 páginas. Switch chassis
También para Cisco Nexus 7000 Series: Manual de referencia (2 páginas), Manual de instrucciones de instalación (39 páginas), Referencia (34 páginas), Manual de instalación (18 páginas), Manual de configuración (28 páginas), Manual de inicio rápido (10 páginas), Manual de inicio rápido (29 páginas), Manual de instrucciones de sustitución (14 páginas), Manual de instrucciones de sustitución (21 páginas), Manual de instalación (16 páginas), Manual de solución de problemas (10 páginas)

Cisco Nexus 7000 Series Configuración de
Configuring DNS
Virtualization Support for DNS Clients
Cisco NX-OS supports multiple instances of the DNS clients that run on the same system. You can configure
a DNS client in each virtual device connect (VDC).You can optionally have a different DNS client configuration
in each virtual routing and forwarding (VRF) instance within a VDC. By default, Cisco NX-OS places you
in the default VDC and default VRF unless you specifically configure another VDC and VRF. See the Cisco
NX-OS Virtual Device Context Configuration Guide .

Licensing Requirements for DNS Clients

This feature does not require a license. Any feature not included in a license package is bundled with the Cisco
NX-OS system images and is provided at no extra charge to you. For a complete explanation of the Cisco
NX-OS licensing scheme, see the Cisco NX-OS Licensing Guide.

Prerequisites for DNS Clients

• You must have a DNS name server on your network.
• If you configure VDCs, install the Advanced Services license and enter the desired VDC (see the Cisco

Guidelines and Limitations for DNS Clients

• You configure the DNS client in a specific VRF. If you do not specify a VRF, Cisco NX-OS uses the
• If you are familiar with the Cisco IOS CLI, be aware that the Cisco NX-OS commands for this feature

Default Settings for DNS Client Parameters

The table below lists the default settings for DNS client parameters.
Table 1: Default DNS Client Parameters
Parameters
DNS client
OL-25777-03
NX-OS Virtual Device Context Configuration Guide).
default VRF.
might differ from the Cisco IOS commands that you would use.
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 6.x
Virtualization Support for DNS Clients
Default
Enabled
3