- ページ 3

サーバー Cisco Nexus 7000 SeriesのPDF 設定をオンラインで閲覧またはダウンロードできます。Cisco Nexus 7000 Series 8 ページ。 Switch chassis
Cisco Nexus 7000 Series にも：リファレンス・マニュアル (2 ページ), 取付説明書 (39 ページ), 参考 (34 ページ), インストレーション・マニュアル (18 ページ), 設定マニュアル (28 ページ), クイック・スタート・マニュアル (10 ページ), クイック・スタート・マニュアル (29 ページ), 交換取扱説明書 (14 ページ), 交換取扱説明書 (21 ページ), 設置マニュアル (16 ページ), トラブルシューティングマニュアル (10 ページ)

Configuring DNS

Virtualization Support for DNS Clients

Cisco NX-OS supports multiple instances of the DNS clients that run on the same system. You can configure

a DNS client in each virtual device connect (VDC).You can optionally have a different DNS client configuration

in each virtual routing and forwarding (VRF) instance within a VDC. By default, Cisco NX-OS places you

in the default VDC and default VRF unless you specifically configure another VDC and VRF. See the Cisco

NX-OS Virtual Device Context Configuration Guide .

Licensing Requirements for DNS Clients

This feature does not require a license. Any feature not included in a license package is bundled with the Cisco

NX-OS system images and is provided at no extra charge to you. For a complete explanation of the Cisco

NX-OS licensing scheme, see the Cisco NX-OS Licensing Guide.

• You must have a DNS name server on your network.

• If you configure VDCs, install the Advanced Services license and enter the desired VDC (see the Cisco

• You configure the DNS client in a specific VRF. If you do not specify a VRF, Cisco NX-OS uses the

• If you are familiar with the Cisco IOS CLI, be aware that the Cisco NX-OS commands for this feature

The table below lists the default settings for DNS client parameters.

Table 1: Default DNS Client Parameters

Parameters

DNS client

OL-25777-03

NX-OS Virtual Device Context Configuration Guide).

default VRF.

might differ from the Cisco IOS commands that you would use.

Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 6.x

Virtualization Support for DNS Clients

Default

Enabled