Cisco UCS C220 Manual de inicio rápido - Página 12

Navegue en línea o descargue pdf Manual de inicio rápido para Servidor Cisco UCS C220. Cisco UCS C220 17 páginas. Connected safety and security (css)
También para Cisco UCS C220: Manual de instalación y mantenimiento (4 páginas), Manual del usuario (22 páginas)

Imprimir página
Cisco UCS C220 Manual de inicio rápido
Completing the Initial Configuration
Caution

Task 10: Make a test recording

You can make a test recording by dialing out. The recording is stored and then transcoded. When the
process is complete, the recording appears in the View Recordings tab .
Follow these steps:
In the Content Server web interface, go to Management > Recordings > Create recording.
Step 1
Select a recording alias.
Step 2
For Dial number, enter the endpoint address that you want to call. Click Place call.
Step 3
Go to the View Recordings tab. You should see a thumbnail with a red recording dot for the recording
Step 4
in progress.
End the call from the endpoint or by clicking on the thumbnail followed by Edit recording and End call.
Step 5
You can make a test call by dialing in. The recording is stored and then transcoded. When the process is
complete, the recording appears in the View Recordings tab .
Follow these steps:
In the Content Server web interface, go to Management > Recording setup > Recording aliases.
Step 1
Note the H.323 ID, E.164 alias, or SIP address (URI) for the Recording alias that you want to use.
Step 2
From an endpoint, dial one of the addresses that you noted.
Step 3
Go to the View Recordings tab. You should see a thumbnail with a red recording dot for the recording
Step 4
in progress.
End the call from the endpoint or by clicking on the thumbnail followed by Edit recording and End call.
Step 5
Cisco TelePresence Content Server Release 7.0 Quick Start Guide
12
Make sure that all E.164 aliases and H.323 IDs are unique in your network and valid for your
gatekeeper. The H.323 ID of the default live recording alias is Live<serial_number> and the
default on-demand recording alias is OnDemand<serial_number>.
See the online help for an explanation of recording aliases. SIP URIs must be unique in their
network and valid for their SIP registrar.