Cisco UCS C220 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Cisco UCS C220에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS C220 17 페이지. Connected safety and security (css)
Cisco UCS C220에 대해서도 마찬가지입니다: 설치 및 서비스 매뉴얼 (4 페이지), 사용자 설명서 (22 페이지)

페이지 인쇄

Completing the Initial Configuration

Caution

Task 10: Make a test recording

You can make a test recording by dialing out. The recording is stored and then transcoded. When the

process is complete, the recording appears in the View Recordings tab .

Follow these steps:

In the Content Server web interface, go to Management > Recordings > Create recording.

Step 1

Select a recording alias.

Step 2

For Dial number, enter the endpoint address that you want to call. Click Place call.

Step 3

Go to the View Recordings tab. You should see a thumbnail with a red recording dot for the recording

Step 4

in progress.

End the call from the endpoint or by clicking on the thumbnail followed by Edit recording and End call.

Step 5

You can make a test call by dialing in. The recording is stored and then transcoded. When the process is

complete, the recording appears in the View Recordings tab .

Follow these steps:

In the Content Server web interface, go to Management > Recording setup > Recording aliases.

Step 1

Note the H.323 ID, E.164 alias, or SIP address (URI) for the Recording alias that you want to use.

Step 2

From an endpoint, dial one of the addresses that you noted.

Step 3

Go to the View Recordings tab. You should see a thumbnail with a red recording dot for the recording

Step 4

in progress.

End the call from the endpoint or by clicking on the thumbnail followed by Edit recording and End call.

Step 5

Cisco TelePresence Content Server Release 7.0 Quick Start Guide

Make sure that all E.164 aliases and H.323 IDs are unique in your network and valid for your

gatekeeper. The H.323 ID of the default live recording alias is Live<serial_number> and the

default on-demand recording alias is OnDemand<serial_number>.

See the online help for an explanation of recording aliases. SIP URIs must be unique in their

network and valid for their SIP registrar.