Cisco UCS E Series Manual de solución de problemas - Página 7

Navegue en línea o descargue pdf Manual de solución de problemas para Servidor Cisco UCS E Series. Cisco UCS E Series 28 páginas. Ucs e series unified computing system
También para Cisco UCS E Series: Productos (8 páginas), Manual de instalación (46 páginas)

Imprimir página

Cisco UCS E Series Manual de solución de problemas

Overview

Procedure

SUMMARY STEPS

1. Verify that the line speed value is 9600. Use the show line command to verify the line speed value:

2. If the line speed value is correct, verify that the Baud rate value is 9.6K and the terminal type is compatible.

Use the show detail command from /bios/server-management to verify the Baud rate and terminal type:

3. Verify that the Enabled option in Serial over LAN (sol) is configured as no. Use the show detail command

from /sol to verify the sol configuration:

DETAILED STEPS

Step 1

Verify that the line speed value is 9600. Use the show line command to verify the line speed value:

Example:

Router# show line

Tty Line Typ

0 CTY

1 AUX

2 TTY

131

131 TTY

Step 2

If the line speed value is correct, verify that the Baud rate value is 9.6K and the terminal type is compatible. Use the

show detail command from /bios/server-management to verify the Baud rate and terminal type:

Example:

router# ucse 2 session imc

CIMC# scope bios/server-management

CIMC /bios/server-management # show detail

Set-up parameters:

Assert NMI on PERR: Disabled

Assert NMI on SERR: Disabled

Baud rate: 9.6k

Console redirection: Serial Port A

FRB2 Enable: Enabled

Flow Control: None

OS Boot Watchdog Timer: Disabled

OS Boot Watchdog Timer Policy: Do Nothing

Power Restore Policy: Power On

Terminal type: PC-ANSI

Step 3

Verify that the Enabled option in Serial over LAN (sol) is configured as no. Use the show detail command from /sol to

verify the sol configuration:

Example:

CIMC# scope sol

CIMC /sol # show detail

Serial Over LAN:

Enabled: no

Baud Rate(bps): 9600

Tx/Rx

A Modem

Roty AccO AccI

9600/9600

Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine

Host Login and CIMC Login Troubleshooting

Uses

Noise Overruns

Int

0/0