Cisco 2600 Series Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Pasarela Cisco 2600 Series. Cisco 2600 Series 22 páginas. Configuring adsl wic to support pppoe clients
También para Cisco 2600 Series: Manual de instalación (12 páginas), Notas de publicación (32 páginas), Configuración (15 páginas), Nota de aplicación (41 páginas), Ficha de datos (6 páginas), Anexo (15 páginas), Visión general (13 páginas), Manual de inicio rápido (2 páginas), Manual (5 páginas)

Setting Up the Chassis

For more information on cable specifications, refer to the online document Cisco Modular Access

Note

Router Cabling Specifications on the Documentation CD-ROM that accompanied your router

package and on Cisco.com. For cable ordering information, see

•

Setting Up the Chassis

You can set the chassis on a desktop, install it in a rack, or mount it on a wall or other flat surface. Use

the procedure in this section that best meets the needs of your network. The sections are as follows:

•

Cisco 2600 series routers include the following models:

•

Setting the Chassis on a Desktop

Before setting the router on a desktop, shelf, or other flat, secure surface, perform the following steps to

install the rubber feet:

Locate the rubber feet on the black adhesive strip that shipped with the chassis. (See

Step 1

Cisco 2600 Series Routers Hardware Installation Guide

3-2

Ethernet 10BASE-T hub or PC with a network interface card for connection to the Ethernet (LAN)

port(s).

Console terminal (an ASCII terminal or a PC running terminal emulation software) configured for

9600 baud, 8 data bits, no parity, and 2 stop bits. A terminal is required unless you are using the

AutoInstall procedure. See the

page 3-20

for instructions on connecting a console terminal.

Modem for connection to the auxiliary port for remote administrative access. (Optional)

Setting the Chassis on a Desktop, page 3-2

Mounting the Chassis in a Rack, page 3-4

Mounting the Chassis on the Wall, page 3-10

Cisco 2610 and Cisco 2610XM

Cisco 2611 and Cisco 2611XM

Cisco 2612 and Cisco 2613

Cisco 2620 and Cisco 2620XM

Cisco 2621 and Cisco 2621XM

Cisco 2650 and Cisco 2650XM

Cisco 2651 and Cisco 2651XM

Cisco 2691

"Connecting the Console Terminal and Modem" section on

Chapter 3

Installing the Router

"Obtaining Technical

Assistance".

Figure

3-1.)

OL-2171-02