Cisco 3G MicroCell Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Pasarela Cisco 3G MicroCell. Cisco 3G MicroCell 20 páginas. At&t wireless network gps signal extender
También para Cisco 3G MicroCell: Manual del usuario (20 páginas), Manual del usuario (20 páginas), Manual de inicio rápido (8 páginas)

Imprimir página

Hardware Problems

If...

The 3G status

indicator is off.

The 3G status

indicator is

green/flashing.

The 3G status

indicator is

red/flashing.

Service Problems

If...

The PC network

performance

declines.

A 3G device is unable

to access the AT&T

3G MicroCell

™

service.

Approved callers

are having trouble

accessing your AT&T

™

3G MicroCell

service.

4030453_RevA_6.75x8.25_Mar6.indd 16

, continued

Then...

There is no configuration.

• To fix, recycle power on the MicroCell.

• If the condition does not clear, contact Customer Support at 800.331.0500 for assistance.

Initialization is in process.

• If you haven't completed online registration and account activation, do so now (see Step

3. Account Activation on page 12).

Note: Registration and account activation should be completed in a single uninterrupted

session, if possible. If the process is interrupted and/or takes an hour or more to complete,

it is recommended that you recycle power on the MicroCell to restart initialization and

authentication.

• Assuming you have completed the online requirements in a timely fashion, the 3G status

indicator should turn to steady green within minutes of achieving a location fix (see the

GPS status indicator). If you don't have a location fix, troubleshoot that condition first.

• If these measures fail, contact Customer Support at 800.331.0500 for assistance.

Faults are present on the MicroCell that impact service.

• Check the GPS status indicator. If it is solid green while the 3G status indicator is flashing

red, most likely the problem is that a location fix was obtained, but the location is outside

the tolerance allowed by AT&T.

• Contact Customer Support at 800.331.0500 for assistance.

Then...

Traffic across the MicroCell has risen to a critical level.

• Check for unusually heavy data requests (video downloads are likely suspects) and limit them,

if possible.

• If the decline is chronic, consider upgrading service.

The device may not be registered (see Step 3. Account Activation on page 12).

The MicroCell may be serving a full load of calls.

Note: A full load is four simultaneous calls.

3/6/2009 5:43:34 PM