Cisco C1100TG-1N24P32A Manual de instalación del hardware - Página 17
Navegue en línea o descargue pdf Manual de instalación del hardware para Pasarela Cisco C1100TG-1N24P32A. Cisco C1100TG-1N24P32A 44 páginas. Terminal gateway
Imprimir página
Prepare for Router Installation
• If no wrist strap is available, ground yourself by touching a metal part of the chassis.
Caution
For the safety of your equipment, periodically check the resistance value of the anti-static strap. It should be
between 1 and 10 megohms (Mohm).
General Site Requirements
Warning
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes. Statement 1074
Warning
To reduce the risk of electric shock, the chassis of this equipment needs to be connected to permanent earth
ground during normal use. Statement 445
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. To reduce risk of
electric shock or fire, ensure that the protective device is rated not greater than: 20A (AC), 5A (HVDC), 7A
(DC). Statement 1005
Warning
To reduce risk of electric shock and fire, a readily accessible two-poled disconnect device must be incorporated
in the fixed wiring. Statement 1022
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed by
skilled, instructed or qualified personnel. Statement 1017
Warning
To reduce the risk of fire or bodily injury, do not operate it in an area that exceeds the maximum recommended
ambient temperature of: 40 °C Statement 1047
Site Selection Guidelines
The Cisco 1100 Series ISRs require specific environmental operating conditions. Temperature, humidity,
altitude, and vibration can affect the performance and reliability of the router. The following sections provide
specific information to help you plan for the proper operating environment.
The Cisco 1100 Series ISRs are designed to meet the industry EMC, safety, and environmental standards
described in the Regulatory Compliance and Safety Information for the Cisco 1100 Series ISR document.
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
General Site Requirements
13