- ページ 17

ゲートウェイ Cisco C1100TG-1N24P32AのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco C1100TG-1N24P32A 44 ページ。 Terminal gateway

Prepare for Router Installation

• If no wrist strap is available, ground yourself by touching a metal part of the chassis.

Caution

For the safety of your equipment, periodically check the resistance value of the anti-static strap. It should be

between 1 and 10 megohms (Mohm).

General Site Requirements

Warning

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national

electrical codes. Statement 1074

Warning

To reduce the risk of electric shock, the chassis of this equipment needs to be connected to permanent earth

ground during normal use. Statement 445

Warning

This product relies on the building's installation for short-circuit (overcurrent) protection. To reduce risk of

electric shock or fire, ensure that the protective device is rated not greater than: 20A (AC), 5A (HVDC), 7A

(DC). Statement 1005

Warning

To reduce risk of electric shock and fire, a readily accessible two-poled disconnect device must be incorporated

in the fixed wiring. Statement 1022

Warning

This unit is intended for installation in restricted access areas. A restricted access area can be accessed by

skilled, instructed or qualified personnel. Statement 1017

Warning

To reduce the risk of fire or bodily injury, do not operate it in an area that exceeds the maximum recommended

ambient temperature of: 40 °C Statement 1047

The Cisco 1100 Series ISRs require specific environmental operating conditions. Temperature, humidity,

altitude, and vibration can affect the performance and reliability of the router. The following sections provide

specific information to help you plan for the proper operating environment.

The Cisco 1100 Series ISRs are designed to meet the industry EMC, safety, and environmental standards

described in the Regulatory Compliance and Safety Information for the Cisco 1100 Series ISR document.

Hardware Installation Guide for the Cisco 1100 Terminal Gateway

General Site Requirements