Cisco Expressway CE1200 Manual de instalación del aparato - Página 9
Navegue en línea o descargue pdf Manual de instalación del aparato para Pasarela Cisco Expressway CE1200. Cisco Expressway CE1200 42 páginas.
También para Cisco Expressway CE1200: Manual de instalación (23 páginas)
Imprimir página
Introduction
•
Introduction
This guide describes how to install a CE1200 appliance into a video network, including how to prepare and
install the hardware, and how to do the basic initial configuration. It also provides some troubleshooting
suggestions.
Note
The guide is for Cisco Expressway Series deployments only, as the appliance does not support the Cisco VCS
product.
Required Software Version
The CE1200 ships with pre-installed Expressway software. If you need to in future, you can upgrade the
pre-installed software to a later supported version. (If you want to check whether the Cisco Expressway has
the latest software installed, go to
Cisco Expressway.)
The minimum required Expressway software version depends on which revision of the appliance you are
using. You can identify this from the serial number, as follows:
Table 2: Minimum software versions supported on CE1200 appliances
Platform
2nd revision CE1200 (Expressway
pre-installed on UCS C220 M5L)
1st revision CE1200 (Expressway
pre-installed on UCS C220 M5L)
Introduction, on page 3
C H A P T E R
http://software.cisco.com/download/navigator.html
Serial numbers
52E1####
52E0####
Cisco Expressway CE1200 Appliance Installation Guide (14.0)
2
and navigate to the
Required software
X12.5.5 or later
X8.11.1 or later
3