Cisco Expressway CE1200 어플라이언스 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco Expressway CE1200에 대한 어플라이언스 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Expressway CE1200 42 페이지.
Cisco Expressway CE1200에 대해서도 마찬가지입니다: 설치 매뉴얼 (23 페이지)

페이지 인쇄

Introduction

•

Introduction

This guide describes how to install a CE1200 appliance into a video network, including how to prepare and

install the hardware, and how to do the basic initial configuration. It also provides some troubleshooting

suggestions.

Note

The guide is for Cisco Expressway Series deployments only, as the appliance does not support the Cisco VCS

product.

Required Software Version

The CE1200 ships with pre-installed Expressway software. If you need to in future, you can upgrade the

pre-installed software to a later supported version. (If you want to check whether the Cisco Expressway has

the latest software installed, go to

Cisco Expressway.)

The minimum required Expressway software version depends on which revision of the appliance you are

using. You can identify this from the serial number, as follows:

Table 2: Minimum software versions supported on CE1200 appliances

Platform

2nd revision CE1200 (Expressway

pre-installed on UCS C220 M5L)

1st revision CE1200 (Expressway

pre-installed on UCS C220 M5L)

Introduction, on page 3

C H A P T E R

http://software.cisco.com/download/navigator.html

Serial numbers

52E1####

52E0####

Cisco Expressway CE1200 Appliance Installation Guide (14.0)

and navigate to the

Required software

X12.5.5 or later

X8.11.1 or later