Cisco VG400 series Manual de instalación del hardware - Página 19
Navegue en línea o descargue pdf Manual de instalación del hardware para Pasarela Cisco VG400 series. Cisco VG400 series 40 páginas. Voice gateway
También para Cisco VG400 series: Manual de configuración del software (22 páginas), Instalación de (13 páginas)
Imprimir página
- 1. Table of Contents
- 2. Location and Mounting Requirements
- 3. Temperature Control and Ventilation
- 4. Rack Requirements
- 5. Access to Chassis
- 6. Power Source and Supply
- 7. Network Cabling Considerations
- 8. Interference Considerations
- 9. Required Tools and Equipment for Installation
- 10. Site Log
- 11. Installation Checklist
Installing the Cisco VG400 Voice Gateway
The following chapter describes how to install and connect a Cisco VG400 Voice Gateway. The following
sections provide the installation procedures in detail:
Danger
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030
Danger
Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
•
•
•
•
•
Safety Recommendations
Before you begin the installation, read the following safety warnings and recommendations. The following
information is included to alert you to safety recommendations and best practices when working with this
equipment.
Maintaining Safety with Electricity
Follow these guidelines when working on equipment powered by electricity.
Danger
Avoid using or servicing any equipment that has outdoor connections during an electrical storm. There may
be a risk of electric shock from lightning. Statement 1088.
Safety Recommendations, on page 17
Unpacking and Inspection, on page 19
Install the Cisco VG400 Voice Gateway, on page 19
Connect to Power Supply, on page 25
Power-On Procedure, on page 25
C H A P T E R
Cisco VG400 Voice Gateway Hardware Installation Guide
3
17