Epson RX620 - Stylus Photo Color Inkjet Manual de funcionamiento básico - Página 21

Navegue en línea o descargue pdf Manual de funcionamiento básico para Escáner Epson RX620 - Stylus Photo Color Inkjet. Epson RX620 - Stylus Photo Color Inkjet 45 páginas. Epson scan icm updater v1.20 (psb.2008.07.001)
También para Epson RX620 - Stylus Photo Color Inkjet: Especificaciones (2 páginas), Manual Start Here (8 páginas), Actualización (1 páginas), Manual de información del producto (19 páginas), Manual de instrucciones (4 páginas)

Imprimir página

Epson RX620 - Stylus Photo Color Inkjet Manual de funcionamiento básico

35 mm slides

1 Place the film holder on the document table with

the side where the slides will be placed facing

toward you.

2 Set the slides into the film holder with the base side

facing down. The base side of the film is the side

where the film maker's name and film ID numbers

can be read correctly.

Note:

❏ There is a possibility that a film may not be

readable due to the difference of the pitch width

within 6 frames.

❏ Do not press the glass of the document table with

too much force.

Close the document cover completely.

Note:

❏ A newton ring (ring-shaped stripes pattern) may

appear in the scanned image. To remove the newton

ring, set the film with the base side facing up. See the

Reference Guide for detail.

❏ When you are not using the film holder, you can store

it inside the document cover. See "Storing the Film

Holder" on page 23 for details.

Top

Bottom

Printing Basics

You can print photos to 10 × 15 cm (4 × 6 in) paper

without altering any settings.

Load and set film on the document table.

Press the Film button.

Select Basic Print.

Select the film type.

& See "Selecting the Film Type" on page 23

Select the desired photo and set the number of

prints.

Load appropriate paper.

& See "Loading Paper" on page 5

Press the x Color or x B&W button to start

printing.

Printing from Film

Cancel

1. Select

the desired

photo.

2. Set the

number of

prints.

Cancel